Let us cover your Control Wheels/Yokes with High Quality Garment Leather.
-
Our Process:
-
Upon receiving, the yokes are visually inspected, photographed and the owner is notified of any unusual conditions.
-
The yokes are disassembled, abrasive blasted and metal finished.
-
Minor pitting is epoxy filled, cured and finish sanded.
-
They are chemically cleaned and out-gassed in our ovens.
-
The yokes are sprayed with 2 coats of TGIC Polyester powder and oven cured.
-
Yokes are removed after oven curing and allowed to cool to room temperature.
-
Black Top Grade Garment Leather is selected and fitted to the yokes.
-
Patterns are cut and the leather is glued and Hand Stitched in place.
-
The yokes are then re-assembled and inspected and released to shipping.
Notice:
We ask to have the yokes in hand for 7 to 14 days. This allows ample time for epoxy curing and finishing. Yokes should be sent with wiring or switches in place. The switches are necessary to insure proper fit with the new leather. We can if needed remove and replace switches and wiring, there is an additional cost for this service. Please be aware that some switches are impossible to remove without destroying, this is normally due to improper installation. There may be additional costs due to excessive pitting or corrosion. Yoke backing plates and yoke switch covers will be powder coated (included). Rubber yoke bumpers will be cleaned and reconditioned (included). Shipping and Insurance is not included.
<-Click Photos for more Views
And
Price Shown is per Pair |
|
